* feat: Implement Polymorphic Routing
* feat: Add support for Send/Yield annotations with basic Executor
* Adds annotations to Declarative workflow executors
* fix: Address PR Comments
* Implicit filter in collection loops
* Remove debug / usused / superfluous code
* Fix ProtocolBuilder implicit output registrations
* Fix logic error in ExecuteRouteGeneratorTests.ClassWithManualConfigureProtocol_DoesNotGenerate
* fix: Solidify type checks and send/yield type registrations
* fix: Suppress generation of TurnTokens out of AggregateTurnMessagesExecutor
* Fixes an issue where ConcurrentEndExecutor is not expecting TurnTokens.
* fix: Add ProtocolBuilder support for chained-delegation
* Updates Declarative pacakge to rely on chained-delegation Send/Yield registration
* Renames DeclarativeActionExectuor's new ExecuteAsync to ExecuteActionAsync to avoid colliding with Executor.ExecutoeAsync
* fix: Address PR Comments
* Fixes type mapping in FanInEdgeRunner
* Fixes and expalins send/yield type registration in FunctionExecutor
* fixup: build-break
* fix: Add missing SendsMesage declaration to InvokeAzureAgentExecutor
* feat(workflows): Make telemetry opt-in via WithOpenTelemetry()
- Add WorkflowTelemetryOptions class with EnableSensitiveData property
- Add WorkflowTelemetryContext to manage ActivitySource lifecycle
- Add WithOpenTelemetry() extension method on WorkflowBuilder
- Update all workflow components to use telemetry context:
- WorkflowBuilder, Workflow, Executor
- InProcessRunnerContext, InProcessRunner
- LockstepRunEventStream, StreamingRunEventStream
- All edge runners (Direct, FanIn, FanOut, Response)
- Telemetry is now disabled by default
- Users must call WithOpenTelemetry() to enable spans/activities
BREAKING CHANGE: Workflow telemetry is now opt-in. Users who relied on
automatic telemetry must add .WithOpenTelemetry() to their workflow builder.
* refactor: Pass telemetry context as parameter instead of via interface
- Remove IWorkflowContextWithTelemetry interface
- Add internal ExecuteAsync overload that accepts WorkflowTelemetryContext
- Public ExecuteAsync delegates with WorkflowTelemetryContext.Disabled
- InProcessRunner passes TelemetryContext when calling ExecuteAsync
- BoundContext now implements IWorkflowContext (not the removed interface)
* Add optional ActivitySource parameter to WithOpenTelemetry
Allow users to provide their own ActivitySource when enabling telemetry,
giving them better control over the ActivitySource lifecycle. When not
provided, the framework creates one internally (existing behavior).
Changes:
- Add optional activitySource parameter to WithOpenTelemetry() extension
- Update WorkflowTelemetryContext to accept external ActivitySource
- Add unit test for user-provided ActivitySource scenario
* Add component-level telemetry control with disable flags
Allow users to selectively disable specific activity types via
WorkflowTelemetryOptions. All activities are enabled by default.
New disable flags:
- DisableWorkflowBuild: Disables workflow.build activities
- DisableWorkflowRun: Disables workflow_invoke activities
- DisableExecutorProcess: Disables executor.process activities
- DisableEdgeGroupProcess: Disables edge_group.process activities
- DisableMessageSend: Disables message.send activities
Added helper methods to WorkflowTelemetryContext for each activity type
and updated all activity creation sites to use them.
* Implement EnableSensitiveData to log executor input/output
When EnableSensitiveData is true in WorkflowTelemetryOptions, executor
input and output are logged as JSON-serialized attributes in the
executor.process activity.
New activity tags:
- executor.input: JSON serialized input message
- executor.output: JSON serialized output result (non-void only)
Added suppression attributes for AOT/trimming warnings since this is
an opt-in feature for debugging/diagnostics.
* Refactor activity start methods to centralize tagging logic
Move tagging logic into WorkflowTelemetryContext methods:
- StartExecutorProcessActivity now accepts executorId, executorType,
messageType, and message; sets all tags including executor.input
when EnableSensitiveData is true
- Added SetExecutorOutput method to set executor.output after execution
- StartMessageSendActivity now accepts sourceId, targetId, and message;
sets all tags including message.content when EnableSensitiveData is true
Simplified Executor.cs and InProcessRunnerContext.cs by removing
inline tagging code. Added message.content tag constant.
* Revert Python changes
* Update samples and code cleanup
* Fix file formatting
* Add comment
* Add telemetry configuration to declarative workflow
* Remove delays in tests
* Address comments
* refactor: Rename AggregateTurnMessagesExecutor
* feat: Rework Agent Hosting for Configurability and HIL support
* Adds support for selecting whether updates and/or full responses are
emitted to events
* Adds support for HIL/FunctionCalls (including interception)
* Implements internal support for ExternalRequests from any executor
(not just RequestPort)
* test: Add tests for new AIAgentHostExecutor functionality
* feat: Unify non-Handoff Agent Hosting
* doc: More explicit documentation for `overwrite` in RouteBuilder
Subworkflows run into issues with Checkpointing and the Chat Protocol:
* The concurrency rework made subtle changes in behaviour that introduced a hang when using subworkflows with ChatProtocol and streaming execution.
* The ResetAsync() implementation in WorkflowHostExecutor was improperly resetting the joinContext - this was happening on restore checkpoint _after_ the join context was attached when
* Subworkflows cannot be used as the start node when hosted AsAgent due to inability to treat Catch-All as a Chat Protocol
* Subworkflow ownership issue when used in non-concurrent mode after finishing a run
Also fixes:
* When ChatMessages are output by executors that are not agents, there is no corresponding AgentResponseUpdate/AgentResponse event
Breaking Changes
* [BREAKING CHANGE] It is possible to provide the wrong RunId when resuming from CheckpointInfo (even though the data already exists on CheckpointInfo)
* Upgrade to .NET 10
- Require .NET 10 SDK
- Include net10.0 assets in all assemblies
- Move net9.0-only targets to net10.0
- Update LangVersion to latest
- Remove complicated distinctions between debug target TFMs and release target TFMs
- Remove unnecessary package dependencies when built into netcoreapp
- Clean up some ifdefs
- Clean up some analyzer warnings
* Fix CI
* refactor: Unify ExecutorIsh and ExecutorRegistration => ExecutorBinding
* Switch to more modern Record type-tree for Sum Types
* Unify APIs for getting ExecutorBinding
* Fix an issue where workflows consisting entirely of cross-run shareable executors which are not instance-resettable do not properly clear state when running non-concurrently.
* feat: Simplify function-to-executor pattern
* refactor: Normalize API naming
Concurrent run support was recently added to workflows, but Orchestrations did not fully update to support it. A few executors were missing Cross-Run Shareable annotations, and the ConcurrentEnd executor needed to be factory-instantiated.
This also ports the fix for #1613 from #1637, to avoid waiting on that PR.
Remove input type checking in favour of explicit `.DescribeProtocolAsync()` flow. Also removes `.AsAgentAsync()` as the validation happens at workflow run time. This makes it easier to use Workflows with DI without resorting to async-over-sync.
* refactor: remove unused internals
* feat: Execution Mode for sharing a workflow among concurrent runs
* feat: Update WorkflowHostAgent to support concurrent execution
* Also update AsAgent APIs to support injecting a CheckpointManager and an IWorkflowExecutionEnvironment
* fix: Make Read logic consistent in DeclarativeWorkflowContext
* Updates to async run loop.
* fix: Workflow Onwership can be release by nonowner
* fix: Incorrect handling of blockOnPending in StreamingRun
Depending on whether we are running in streaming on non-streaming mode, we may be using the StreamingRun in different ways. Unfortunately, the only place we can really know what is the actual state of execution is in the RunEventStream implementations.
This resulted in blocking where blocking was unneeded and occasionally not-blocking when blocking was needed.
The fix is to move the logic of handling this blocking into RunEventStream implementations.
* fix: Fix cleanup on error and end run
This ensures we clean up the background resources correctly.
* fix: Ensure we let the run loop proceed when shutting down
* fix: Add timeout for Input Waiting
* fix: Make the samples properly clean up `Run`s and `StreamingRun`s
* fix: Simplify Declarative Workflow Run disposal pattern
* Also fixes missing .Disposal() in Integration tests
---------
Co-authored-by: Ben Thomas <ben.thomas@microsoft.com>
Add optional name and description fields to workflows in both Python and .NET implementations, matching the existing agent API pattern.
Python changes:
- Add name/description parameters to WorkflowBuilder.__init__
- Add name/description attributes to Workflow class
- Include name/description in to_dict() serialization
- Add WORKFLOW_NAME and WORKFLOW_DESCRIPTION OTEL attributes
- Add tests in test_serialization.py and test_workflow_observability.py
.NET changes:
- Add Name and Description properties to Workflow and Workflow<T>
- Add WithName() and WithDescription() fluent methods to WorkflowBuilder
- Add WorkflowName and WorkflowDescription OTEL tags
- Add test in WorkflowBuilderSmokeTests.cs
This enables applications like DevUI to display human-readable workflow names (e.g., 'Data Processing Pipeline') instead of auto-generated UUIDs (e.g., 'Workflow 50fdd917').
Fixes: #1181
* feat: Add support for Workflow-as-Executor
* Fixes routing of 'object' compile-typed variables to properly take in type information
* Fixes a concurrency issue in StepTracer
* fix: Make Subworkflow ExternalRequests work properly
* fix: Threading and Concurrency fixes; prep for OffThread Mode
* refactor: Remove dead code around OffStreamRunEventStream
Currently not used, and will be replaced with a rewrite when brought back, so having it in the change is not valuable.
* ci: Work around issues with dotnet-format not properly analyzing the source
* fix: Fix the logic of AsyncCoordinator and AsyncBarrier
* Prevent individual wait cancellations from canceling the entire barrier
* Propagate information about whether the wait was completed or cancelled, and whether any waiters were present when released
* fix: Remove superfluous acces to .Keys in InProcStepTracer
* refactor: Clean up AsyncCoordinator's use of AsyncBarrier
Jacob Alber ·
Tao Chen ·
Shyju Krishnankutty ·
Stephen Toub ·
Victor Dibia ·
Ben Thomas ·